AUTOMATIC WATER DRAIN FOR AIR RECEIVER/TANK
Compressed air systems can become contaminated and production schedules can get seriously disrupted – just because a simple duty has been neglected.
Timer controlled condensate drain for all your compressed air applications
The Drain is designed to remove condensate from compressors, compressed air dryers and receivers -any size, type or manufacturer.
The Drain offers true installation simplicity and it is recognised as the most reliable and best performing condensate drain worldwide. The large orifice in the direct acting valve, combined with it’s sophisticated timer module ensure many years of trouble-free draining of condensate.
* Does not air-lock during operation.
* Compressed air systems up to any size.
* Also available in stainless steel.
* The direct acting valve is serviceable.
* Suitable for all types of compressors.
* Test (micro-switch) feature – test to ensure operating correctly
* Retains cycle accuracy.
* Premium PCB components.
* Large (4.5 mm) valve orifice.
* Medium pressure up to 16 Bar
Maximum compressor system capacity Unlimited
Valve connection options 1/2”, 3/8”and 1/4” BSP and NPT
Minimum system pressure 0 bar
Maximum system pressure 16 bar
Minimum medium temperature 2°C
Maximum medium temperature 50°C
Valve orifice 4.5 mm
Type of operating valve Direct acting
Valve seals FPM (Viton)
Installation enclosure IP65/NEMA 4
Voltage range options 10 to 380VAC/DC 50/60 Hz.
Time cycle range (ON – OFF) 0.5/10 seconds – 0.5/45 min
Height x Depth x Width 115 x 88 x44 mm
Information provided herewith is believed to be accurate and reliable. However, no responsibility is assumed for it’s use or for any infringement of patents or rights of others, which may result from its use. In addition, the supplier reserves the right to revise information without notice and without incurring any obligation.
Failure to carry out regular routine draining can have catastrophic results.